Installation Instructions for an Electronic AVR to be used with appliances: Switch off the mains. Place the stabilizer at least 15 centimeters away from walls or any other object. Plug the stabilizer to the mains. Connect your appliance to the stabilizer. Please ensure that all there are no loose contacts. Switch on the mains.
Note: An output/input switch is provided on every Logicstat stabilizer. Press this to ascertain input voltage at any time. This will not interfere with the working of your stabilizer. A pilot lamp indicates that the stabilizer is in operation. This switch should normally be kept on the output side.
In case you require further help please contact us at support@logicstat.com
| 
